The process generally involves: puttyIt seems that there is no text provided for translation. Please provide the text you would like to have translated into English.primerIt seems that there is no text provided for translation. Please provide the text you would like me to translate.topcoat. Putty should be applied by scraping, aiming to fill holes. Due to its poor adhesion and tendency to crack from excessive powder, it is not suitable for large-area filling. Therefore, after drying, it should be sanded as thoroughly as possible. For large-area filling, a sanding primer must be sprayed. Our factory offers various colors and types of sanding primers for selection. Nowadays, more and more manufacturers use nitrocellulose topcoats, but they do not just use nitrocellulose primers; instead, they opt for PU-based seal primers, transparent primers, or even PE-based primers in conjunction with nitrocellulose topcoats. This approach can yield unexpected results in enhancing decorative quality, shortening construction time, reducing overall costs, and elevating product standards.

matters need attention:

(1) When the construction environment is hot and humid, spraying nitrocellulose paint can easily result in "whitening." In such cases, the factory's bleaching water can be used, with its usage not exceeding 15% of the thinner. If the paint film still whitens within this range, spraying should be stopped until the environment allows for resumption. Adding too much will only slow down the drying process and make the paint film softer.

(2) When using matte paint, the paint must be thoroughly mixed after opening the can. Stir once for each use to maintain a uniform gloss effect.

(3) Nitrocellulose colored surface paint, pay attention to the uniform color. Pay attention to the interval time of each layer of coating.

(4) Nitrocellulose paint is a natural drying type of coating. Do not apply other reactive coatings on the upper layer, otherwise it may cause unpredictable serious defects such as biting, cracking and wrinkling.

(5) After painting, the paint should be filtered with 120-200# gauze, and then left for 20 minutes before spraying.

packaging and storage:

4L and 20L iron can packaging, stored in a cool, dry and ventilated place. The shelf life is one year from the date of production.