Essential details
Shipping:Express delivery
Product Introduction
Water based single component
Product Features:
1. Does not contain harmful substances such as benzene, benzene derivatives, mercury, lead, free TDI, etc;
2. Directly diluted with water, easy to apply, fast drying speed, good initial hardness, and easy to polish;
3. Good anti-adhesion properties, able to meet the needs of large-scale production;
4. Excellent coverage, high hardness, and scratch resistance;
5. Good water resistance, yellowing resistance, aging resistance and non-combustibility;
6. The paint film has a smooth and delicate texture, rich colors, and long-lasting luster.
Construction method:
Can be sprayed or brushed, and can be colored with colorants or pastes.
Drying method:
It can be dried at room temperature (temperature 5-40 ° C, humidity ≤ 80%). When the temperature is too low or the humidity is too high, it can be dried by heating up; The production line can use infrared heating or microwave drying.
matters needing attention:
1. The environment must be kept clean, the surface of the wood should reach the standard moisture content, and there should be no dust, grease, or other dirt. Tools such as spray guns and brushes should be cleaned with water before construction can begin;
2. Dilute with clean tap water, and filter out any impurities in the water;
3. Please stir thoroughly before use. The diluted paint should be left to stand for 15 minutes to eliminate bubbles. During construction, it should be stirred evenly every hour to avoid sedimentation;
4. The construction coating amount should not exceed 120g/㎡ as much as possible. Excessive coating at once may lead to slow drying, poor hardness, poor adhesion and other drawbacks;
5. The recoating time should be at least 4 hours (depending on the ambient temperature, humidity, and film thickness), subject to actual drying;
6. Avoid getting wet before the paint film dries to maintain better results.
keep in storage:
Store in a dry and ventilated place at 5-40 °C, sealed and protected from direct sunlight and rain.
Product Features:
1. Does not contain harmful substances such as benzene, benzene derivatives, mercury, lead, free TDI, etc;
2. Directly diluted with water, easy to apply, fast drying speed, good initial hardness, and easy to polish;
3. Good anti-adhesion properties, able to meet the needs of large-scale production;
4. Excellent coverage, high hardness, and scratch resistance;
5. Good water resistance, yellowing resistance, aging resistance and non-combustibility;
6. The paint film has a smooth and delicate texture, rich colors, and long-lasting luster.
Construction method:
Can be sprayed or brushed, and can be colored with colorants or pastes.
Drying method:
It can be dried at room temperature (temperature 5-40 ° C, humidity ≤ 80%). When the temperature is too low or the humidity is too high, it can be dried by heating up; The production line can use infrared heating or microwave drying.
matters needing attention:
1. The environment must be kept clean, the surface of the wood should reach the standard moisture content, and there should be no dust, grease, or other dirt. Tools such as spray guns and brushes should be cleaned with water before construction can begin;
2. Dilute with clean tap water, and filter out any impurities in the water;
3. Please stir thoroughly before use. The diluted paint should be left to stand for 15 minutes to eliminate bubbles. During construction, it should be stirred evenly every hour to avoid sedimentation;
4. The construction coating amount should not exceed 120g/㎡ as much as possible. Excessive coating at once may lead to slow drying, poor hardness, poor adhesion and other drawbacks;
5. The recoating time should be at least 4 hours (depending on the ambient temperature, humidity, and film thickness), subject to actual drying;
6. Avoid getting wet before the paint film dries to maintain better results.
keep in storage:
Store in a dry and ventilated place at 5-40 °C, sealed and protected from direct sunlight and rain.
