usage method:The process generally involves: putty —— primer —— topcoat. Putty should be applied by scraping, aiming to fill holes. Due to its poor adhesion and tendency to crack from excessive powder, it is not suitable for large-area filling. Therefore, after drying, it should be sanded as thoroughly as possible. For large-area filling, a sanding primer must be sprayed. Our factory offers various colors and types of sanding primers for selection. Nowadays, more and more manufacturers use nitrocellulose topcoats, but they do not just use nitrocellulose primers; instead, they opt for PU-based seal primers, transparent primers, or even PE-based primers in conjunction with nitrocellulose topcoats. This approach can yield unexpected results in enhancing decorative quality, shortening construction time, reducing overall costs, and elevating product standards.
matters need attention:
(1) When the construction environment is hot and humid, spraying nitrocellulose paint can easily result in "whitening." In such cases, the factory's bleaching water can be used, with its usage not exceeding 15% of the thinner. If the paint film still whitens within this range, spraying should be stopped until the environment allows for resumption. Adding too much will only slow down the drying process and make the paint film softer.
(2) When using matte paint, the paint must be thoroughly mixed after opening the can. Stir once for each use to maintain a uniform gloss effect.
(3) Nitrocellulose colored surface paint, pay attention to the uniform color. Pay attention to the interval time of each layer of coating.
(4) Nitrocellulose paint is a natural drying type of coating. Do not apply other reactive coatings on the upper layer, otherwise it may cause unpredictable serious defects such as biting, cracking and wrinkling.
(5) After painting, the paint should be filtered with 120-200# gauze, and then left for 20 minutes before spraying.
packaging and storage:
4L and 20L iron can packaging, stored in a cool, dry and ventilated place. The shelf life is one year from the date of production.

推荐产品

水性单组分系列

水性双组分系列

NC 透明腻子

NC 底漆

NC 固体漆

NC 清晰顶涂层

PE Primer Series

Didebao系列

PU 单色底漆

. PU 透明底漆

PU闪银漆系列

PU仿皮革表面涂料

PU 彩色透明表面漆

PU 单色面漆

PU 清漆顶涂系列

塑料漆

涂层涂料

高级工业涂料

UV填充剂

UV固体颜色油漆

UV透明底漆

UV Clear Topcoat

水性涂料辅助材料

水性紫外线油漆

广东汇龙涂料有限公司